Difference between revisions of "2ABU6-G1"

From Hackerspace ACKspace
Jump to: navigation, search
(Created initial page with some logs)
 
(added pinout)
Line 6: Line 6:
 
}}
 
}}
 
A.K.A. Minew, MS93MFZ_V1.0, MS93MF6_V1.2, MT7628, Thingoo, 2ABU6-G1
 
A.K.A. Minew, MS93MFZ_V1.0, MS93MF6_V1.2, MT7628, Thingoo, 2ABU6-G1
 +
Thanks to Monadnock for a lot of the pin labels
  
Thanks to Monadnock for a lot of the pin labels
+
=== connecting UART ===
 +
/!\ don't connect PoE and UART, you will fry the main board
 +
 
 +
use 3.3V logic to be safe
 +
 
 +
=== updating firmware ===
 +
* login to the router (http)
 +
* go to tab <code>Other</code> (the last tab)
 +
* scroll to <code>FIRMWARE UPGRADE</code>
 +
** either choose USB and put the firmware as <code>thingoo-upgrade.bin</code> on the root of a USB stick
 +
** or choose put the firmware on a (local) webserver and fill in its URL
  
 +
=== troubleshooting ===
 +
* ModemManager
 +
* Hardware flow control
 +
* shorts
 
=== pins and connectors ===
 
=== pins and connectors ===
 
==== J1 ====
 
==== J1 ====
 
SoM row near the UART (J8) header
 
SoM row near the UART (J8) header
  
# USB data
+
# USB D-
# USB data
+
# USB D+
 
# GND
 
# GND
# SD
+
# SD_D2 (MDI_TN_P4)
# SD
+
# SD_D3 (MDI_TP_P4)
# SD
+
# SD_CMD (MDI_RN_P4)
# SD
+
# SD_CLK (MDI_RP_P4)
# SD
+
# SD_CD (MDI_TN_P3)
# SD
+
# SD_WP (MDI_TP_P3)
# SD
+
# SD_D0 (MDI_RN_P3)
# SD
+
# SD_D1 (MDI_RP_P3)
# ETH
+
# ETH TXON0 (MDI_TN_P0)
# ETH
+
# ETH TXOP0 (MDI_TP_P0)
# ETH
+
# ETH RXIN0 (MDI_RN_P0)
# ETH
+
# ETH RXIP0 (MDI_RP_P0)
 
# GND
 
# GND
# UART RX
+
# UART_RXD0 (GPIO#13)
# UART TX
+
# UART_TXD0 (GPIO#12)
# PWM_CH0 (testpoint T11)
+
# PWM_CH0 (GPIO#11, testpoint T11)
  
 
==== J1 ====
 
==== J1 ====
 
SoM row near the SD card slot
 
SoM row near the SD card slot
  
# ?
+
# I2C_SD (GPIO#5)
# ?
+
# I2C_SCLK (GPIO#4)
# ?
+
# I2S_CLK (GPIO#3)
# ?
+
# I2S_WS (GPIO#2)
# ?
+
# I2S_DO (GPIO#1)
# ?
+
# I2S_DI (GPIO#0)
# ?
+
# GND
# ?
+
# UART_RXD1 (GPIO#46)
# ?
+
# UART_TXD1 (GPIO#45)
# ?
+
# WLED_N (GPIO#44)
# LED1 (GPIO43, active high)
+
# LINK0 LED1 (GPIO43, active high)
# ?
+
# LINK3
# ?
+
# LINK4
# ?
+
# WPS_RES_PBC
# ?
+
# REF_CLKO (GPIO#38)
# ?
 
 
# GND
 
# GND
 
# GND
 
# GND
Line 60: Line 74:
 
UART, presumably 3.3v
 
UART, presumably 3.3v
  
# Vin (tied to U10-8, EML3276 near SW2, also to testpoint DC4.5V=T20 via the switch in on-position)
+
# Vin (tied to U10-8, EML3276 near SW2, also to testpoint DC4.5V=T20 via switch J13 in on-position)
 
# RxD
 
# RxD
 
# TxD
 
# TxD
Line 84: Line 98:
 
* [https://blog.monadnock.ca/minew-ble-wifi-gateway-documentation Monadnock consultancy community blog]
 
* [https://blog.monadnock.ca/minew-ble-wifi-gateway-documentation Monadnock consultancy community blog]
 
* [https://fccid.io/2ABU6-G1 FCC entry]
 
* [https://fccid.io/2ABU6-G1 FCC entry]
 +
* [https://nl.aliexpress.com/item/32816761993.html reference] [https://nl.aliexpress.com/item/32825672226.html designs] compared to the FCC internal pictures and Monadnock's pinout

Revision as of 14:14, 21 July 2021

Project: 2ABU6-G1
Featured: Yes
State Active
Members User:Da Syntax, User:Xopr
GitHub No GitHub project defined. Add your project here.
Description Minew BLE/Wifi Gateway
Picture
No project picture! Fill in form Picture or Upload a jpeg here

A.K.A. Minew, MS93MFZ_V1.0, MS93MF6_V1.2, MT7628, Thingoo, 2ABU6-G1 Thanks to Monadnock for a lot of the pin labels

connecting UART

/!\ don't connect PoE and UART, you will fry the main board

use 3.3V logic to be safe

updating firmware

  • login to the router (http)
  • go to tab Other (the last tab)
  • scroll to FIRMWARE UPGRADE
    • either choose USB and put the firmware as thingoo-upgrade.bin on the root of a USB stick
    • or choose put the firmware on a (local) webserver and fill in its URL

troubleshooting

  • ModemManager
  • Hardware flow control
  • shorts

pins and connectors

J1

SoM row near the UART (J8) header

  1. USB D-
  2. USB D+
  3. GND
  4. SD_D2 (MDI_TN_P4)
  5. SD_D3 (MDI_TP_P4)
  6. SD_CMD (MDI_RN_P4)
  7. SD_CLK (MDI_RP_P4)
  8. SD_CD (MDI_TN_P3)
  9. SD_WP (MDI_TP_P3)
  10. SD_D0 (MDI_RN_P3)
  11. SD_D1 (MDI_RP_P3)
  12. ETH TXON0 (MDI_TN_P0)
  13. ETH TXOP0 (MDI_TP_P0)
  14. ETH RXIN0 (MDI_RN_P0)
  15. ETH RXIP0 (MDI_RP_P0)
  16. GND
  17. UART_RXD0 (GPIO#13)
  18. UART_TXD0 (GPIO#12)
  19. PWM_CH0 (GPIO#11, testpoint T11)

J1

SoM row near the SD card slot

  1. I2C_SD (GPIO#5)
  2. I2C_SCLK (GPIO#4)
  3. I2S_CLK (GPIO#3)
  4. I2S_WS (GPIO#2)
  5. I2S_DO (GPIO#1)
  6. I2S_DI (GPIO#0)
  7. GND
  8. UART_RXD1 (GPIO#46)
  9. UART_TXD1 (GPIO#45)
  10. WLED_N (GPIO#44)
  11. LINK0 LED1 (GPIO43, active high)
  12. LINK3
  13. LINK4
  14. WPS_RES_PBC
  15. REF_CLKO (GPIO#38)
  16. GND
  17. GND
  18. VDD (3.5v, testpoint T2)
  19. VDD (3.5v, testpoint T2)

J8

UART, presumably 3.3v

  1. Vin (tied to U10-8, EML3276 near SW2, also to testpoint DC4.5V=T20 via switch J13 in on-position)
  2. RxD
  3. TxD
  4. GND

J12

related to nRF52

  1. GND
  2. V (3.3v, same potential as T23)
  3. D ?
  4. C ?
  5. Reset?

CON1

IPEX/UFL for Bluetooth, connected to the middle antenna

CON2

Ribbon connector to WS2812 LEDs, flip up to release

also see