Difference between revisions of "Avaya"

Revision as of 14:48, 31 March 2020

only uses pins 1,2,3 + 6 (100Base-T)
PoE compatible
custom power module available: GND:pin 7, +48V:pin 8
upon booting (about 20 seconds), the following message appears:
100 mbps ethernet (you might want to unplug the ethernet cable if the keys do not respond)

* to program (after this step, you can plug in the ethernet connection again so you are able to type in the SIG command at the end)
press *
confirm every default with # (8x)
at the end, it says "No new values. #=OK": confirm
at the blank screen, type mute744# (Mute SIG#, you will notice a distinct short tick when pressing mute, and other keys being silent)
change to SIP by cycling using * and confirm using #

You will need a TFTP server and the 46xxSettings.txt file (see Avaya's sample and a snippet from LeftyBC on github gist

Avaya 9608

Avaya 9650

latest supported SIP firmware version seems to be 2.6.17.0
also uses 46xxsettings.txt
- $MACADDR is not usable in the config file
- SKINS and CURRENT_SKIN doesn't work
- CURRENT_CONTENT works: even the option of adding hidden menus
- CURRENT_LOGO doesn't work
- SET SIP_CONTROLLER_LIST is most likely numeric
- no support for FORCE_SIP_*
8+1 auxiliary buttons are not programmable, only the 3 appLines, 4 softKeys and 5 hardButtons (calllog, contacts amenu, message, forward)
doesn't handle 401 Unauthorized
xopr had problems with ACK/BYE from the phone (it never hangs up and some calls will disconnect after ~30 seconds)

Location: xopr's (project crate and a bunch at home)

@@ Line 22: / Line 22: @@
 === 9650 ===
 [[Image:Avaya 9650.jpg|thumb|Avaya 9650]]
+* latest supported SIP firmware version seems to be 2.6.17.0
+* also uses 46xxsettings.txt
+** <code>$MACADDR</code> is not usable in the config file
+** <code>SKINS</code> and <code>CURRENT_SKIN</code> doesn't work
+** <code>CURRENT_CONTENT</code> works: even the option of adding hidden menus
+** <code>CURRENT_LOGO</code> doesn't work
+** <code>SET SIP_CONTROLLER_LIST</code> is most likely numeric
+** no support for <code>FORCE_SIP_*</code>
+* 8+1 auxiliary buttons are not programmable, only the 3 appLines, 4 softKeys and 5 hardButtons (calllog, contacts amenu, message, forward)
+* doesn't handle <code>401 Unauthorized</code>
+* [[User:Xopr|xopr]] had problems with ACK/BYE from the phone (it never hangs up and some calls will disconnect after ~30 seconds)
 Location: [[Location::User:xopr|xopr's]] (project crate and a bunch at home)
 [[Category:Telephony]]