Difference between revisions of "Digital Decoder Mod"

From Hackerspace ACKspace
Jump to: navigation, search
Line 6: Line 6:
 
I've currently connected the digital decoder to my arduino, this is the output I've gotten so far:  
 
I've currently connected the digital decoder to my arduino, this is the output I've gotten so far:  
  
<nowiki><pre>Success1 registering the  Video DAC devices for board: 1300, daughter board: 0
+
<pre>Success1 registering the  Video DAC devices for board: 1300, daughter board: 0
 
Success2 registering the  Video DAC devices for board: 1300, daughter board: 0
 
Success2 registering the  Video DAC devices for board: 1300, daughter board: 0
 
Success3 registering the  Video DAC devices for board: 1300, daughter board: 0
 
Success3 registering the  Video DAC devices for board: 1300, daughter board: 0
Line 177: Line 177:
 
Error downloading version.txt. Update canceled.
 
Error downloading version.txt. Update canceled.
  
</pre></nowiki>
+
</pre>

Revision as of 18:01, 11 April 2011

Project: Digital Decoder Mod
Featured:
State Active
Members Prodigity
GitHub No GitHub project defined. Add your project here.
Description Getting dosbox to work on the digital decoder
Picture
No project picture! Fill in form Picture or Upload a jpeg here

I've currently connected the digital decoder to my arduino, this is the output I've gotten so far:

Success1 registering the  Video DAC devices for board: 1300, daughter board: 0
Success2 registering the  Video DAC devices for board: 1300, daughter board: 0
Success3 registering the  Video DAC devices for board: 1300, daughter board: 0
[cyg_net_init] Init: mbinit(0x00000000)
[cyg_net_init] Init: cyg_net_init_devs(0x00000000)
Init device 'rltk8139_eth0'
[cyg_net_init] Init: loopattach(0x00000000)
[cyg_net_init] Init: ifinit(0x00000000)
[cyg_net_init] Init: domaininit(0x00000000)
[cyg_net_init] Init: cyg_net_add_domain(0x803afae0)
New domain internet at 0x00000000
[cyg_net_init] Init: cyg_net_add_domain(0x803aea60)
New domain route at 0x00000000
[cyg_net_init] Init: call_route_init(0x00000000)
[cyg_net_init] Done
*************************
* Bootrom Version       *
* V_STB_BT_01_02_050418 *
*************************
pciVIAInit
imageDisplay
Display Refresh Video Output example.
etiDefaultMemPool 0x87efc000 , start 0x80000000 size 0x8000000 hiMemGap 0x104000
xOffset 80 yOffset 48 dstBytesPerPixel 2 imageBmpWidth 640
CXA2161R status : d8
CXA2161R status : d8
Press <CANCEL> remote key to start net booting....
hmpv_read_fcnt
start time in 23eaa96d cycles
Doc Booting....
flRegisterSAFTL: start
flRegisterSAFTL: end
Media Size = 32 Mbytes
Note: Searching for the media header.
      As a result a few H/W protection error messages might be reported.

ERROR in read_Seq: M512_checkAndFixAccessError:Protection error occurred.
ERROR in read_Seq: M512_checkAndFixAccessError:Protection error occurred.
ERROR in read_Seq: M512_checkAndFixAccessError:Protection error occurred.
ERROR in read_Seq: M512_checkAndFixAccessError:Protection error occurred.

Note: header was found - end of media header search.

DALN: PC=0x8009938c, RP=0x800ff560, addr=0x80a19f39: 2 byte load r60
START WITH BANK0
imageversion : 0
START TIME : 26932610
bdkReadBlock has Completed Succefully
CheckSignature returned 0, nds signature passed
END TIME : b07fffd3
Read done in 8ca65206 cycles
Start Booting.... address from [82517820]
00:0a:0 Class 0200: 10ec:8139 0:0x1000[256]I 1:0x10000000[256]M IRQ 9
00:0c:0 Class 0601: 1106:0686
00:0c:1 Class 0101: 1106:0571 4:0x1100[16]I
00:0c:2 Class 0c03: 1106:3038 4:0x1120[32]I IRQ 16
00:0c:4 Class 0000: 1106:3057
pciDolphinFixup: 10ec:8139 IRQ pin A-->B IRQ 10
pciDolphinFixup: 1106:3038 VIA device: IRQ 42 (i8259 IRQ 5)
Linux version 2.2.20 (root@versatel) (ecc version v6.0_6127) #31 Thu Aug 30 19:33:07 KST 2007
CPU frequency: 297 MHz
Mem frequency: 118 MHz
Calibrating delay loop... 296.55 BogoMIPS
Memory: 93072k/130032k available (2736k kernel code, 1056k data, 400k reserved)
Dentry hash table entries: 16384 (order 3, 128k)
Buffer cache hash table entries: 524288 (order 7, 2048k)
Page cache hash table entries: 8192 (order 1, 32k)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 524288 bhash 65536)
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 41) is a 16550A
ttyS01 at 0x02f8 (irq = 40) is a 16550A
pty: 256 Unix98 ptys configured
RAM disk driver initialized:  16 RAM disks of 32768K size
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 32768 blocks [1 disk] into ram disk... done.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver hid
mice: PS/2 mouse device common for all mice
usb-uhci.c: $Revision: 1.2 $ time 21:50:03 Apr 24 2007
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0x1120, IRQ 42
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
Product: USB UHCI Root Hub
SerialNumber: 1120
hub.c: USB hub found
hub.c: 2 ports detected
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 128k freed
Using /lib/modules/2.2.20/block/doc.o
fl: TrueFFS driver 621.41
flRegisterComponents: fFound:01
fl: 1 device(s) found
fl: Registered module at major 62
Partition check:
 fla: fla1
fl: Device 0x0 size 0x1028000 sectors 0x8140
fl:     partition 0x1 size 0x1024c00
 fla: fla1
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs error (device fl(62,1)): ext2_check_blocks_bitmap: Wrong free blocks count for group 0, stored = 2812, counted = 2814
EXT2-fs error (device fl(62,1)): ext2_check_blocks_bitmap: Wrong free blocks count in super block, stored = 10741, counted = 10743
EXT2-fs error (device fl(62,1)): ext2_check_inodes_bitmap: Wrong free inodes count in group 0, stored = 2041, counted = 2043
EXT2-fs error (device fl(62,1)): ext2_check_inodes_bitmap: Wrong free inodes count in super block, stored = 4113, counted = 4115
grep: /var/run/rc.pids: No such file or directory
test: 0: unknown operand
ifconfig: face: error fetching interface information: Device not found

Using /lib/modules/2.2.20/8139too.o
PCI: Increasing latency timer of device 00:50 to 64
eth0: 8139too Fast Ethernet driver 0.9.18-2.2
eth0: Samsung Electronics SMT-6000E, YSU v1.2 <sukun.yoon@samsung.com>
eth0: RealTek RTL8139 Fast Ethernet board found at 0x1000, IRQ 10
eth0: Chip is 'RTL-8139C' - MAC address '00:00:f0:f0:22:bd'.
ifconfig: face: error fetching interface information: Device not found

60: old priority 0, new priority 7
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
Using /lib/modules/2.2.20/saa7128/saa7128.o
Loading Saa7128 Color Bar Test Module
Saa7128color: Device registered with Major Number = 0
Using /lib/modules/2.2.20/saa7128/cxa2161r.o
Loading Cxa2161r Scart Switch Test Module
Cxa2161rScart: Device registered with Major Number = 0
Using /lib/modules/2.2.20/cs4341/cs4341Control.o
insmod: unresolved symbol prinfLinkNewDriver
umount: /proc/bus/usb: Invalid argument
CS4341 open....
rm: cannot remove `/wfs/run': No such file or directory
Login: Received cs4341 mute command
cs4341Control_k.c: Error raised during driver call
-> Error  6 by library Iic        : file /usr/local/Equator/v6.0/tools/source/libdev/iic/mask.c,        line 331        (failed: ack == 0)
-> Error  6 by library Iic        : file /usr/local/Equator/v6.0/tools/source/libdev/iic/mask.c,        line 387        (failed: rcvAck(context))
-> Error  6 by library Iic        : file /usr/local/Equator/v6.0/tools/source/libdev/iic/mask.c,        line 503        (failed: sendAddr(context,slave))
-> Error  6 by library Iic        : file /usr/local/Equator/v6.0/tools/source/libdev/iic/mask.c,        line 704        (failed: send(maskContext,slave,data,size))
-> Error  6 by library Iic        : file /usr/local/Equator/v6.0/tools/source/libdev/iic/etiIic.c,      line 237        (failed: iicMaskSend(handle,slave,data,size))
-> Error  8 by library cs4341Control : file control.c,  line 211        (failed: iicSend(instance->handle,0x22,cs4341muteon,sizeof(cs4341muteon)))
Saa7128color : Device Open (254, 0)
Saa7128color: Opened Value 0
Cxa2161rScart : Device Open (252, 0)
Cxa2161rScart: Opened Value 0

I2C_ADDR - DATA1, DATA2, DATA3, DATA4, DATA5, DATA6, DATA7
  [90]       86 ,   82,    00 ,   3a ,   02 ,   4b ,   ef
Success1 registering the  Video DAC devices for board: 1300, daughter board: 0
Success2 registering the  Video DAC devices for board: 1300, daughter board: 0
Success3 registering the  Video DAC devices for board: 1300, daughter board: 0
Jump starting VLX processor In 6.0 mode.
Vlx processor started successfully (vlxStatus 0x2).
IIS audclk = 1
audclk = 1
DrcDrv: Output -> PAL Interlaced 720 x 576 @ 25Hz

  Primary input:   Enabled
  Secondary input: Enabled
  Graphics input:  Enabled
  gfxFormat:       800
  alphaStream:     0
ping: sendto: Network is unreachable
START: Update checking...
Error downloading version.txt. Update canceled.