Digital Decoder Mod

From Hackerspace ACKspace
Revision as of 19:41, 12 May 2011 by Prodigity (talk | contribs) (The SMT-6010E)
Jump to: navigation, search

The SMT-6010E

Project: Digital Decoder Mod
Featured:
State On Hold"On Hold" is not in the list (Active, Planned, Completed, Stalled, Impossible) of allowed values for the "State of Project" property.
Members [[Members::User:Prodigity|Prodigity]]
GitHub No GitHub project defined. Add your project here.
Description
Picture
No project picture! Fill in form Picture or Upload a jpeg here


SMT-6010E.jpg

Specifications:

CPU 300 MHz DSP
Memory 128 MB SDRAM, 32MB DOC for OS Image, 2MB Flash for Boot loads
RTOS Linux
Browser Html 4.0, http 1.1, DHTML, Frame Support, JavaScript 1.3, SSL 3.0, CSS Level3, Open SSH, Cookie
Decoding MPEC-1: 5 Kbps ~ 1.5 Mbps MPEC-2: 1.5 Mbps ~ 6 Mbps, D1 Resolution, MP@LL MP@ML WMV-9
DRM Verimatrix DRM
Copy Protection Macrovision Copy Protection
WAN Interface RJ-45 for 10/100 Base-T
I/O Interface USB 1.1 2Ports, Composite Video Output, 2 Scarts, S-Video Output, RCA Stereo Audio (L/R) Output, S/PDIF Audio Output
Maintenance Network Configuration Screen Remote Software / OS Update through the Network Self-diagnostic Function

Description

The SMT-6010E is a Digital Decoder ... blabla bla

Gaining Access

...

I've currently connected the digital decoder to the ft232rl chip on my arduino (usb <-> rs232 conversion). When booting up the device

After pressing 'Enter', the console asks me for a username and a password. Unfortunately, the password isn't easy to guess