Difference between revisions of "Field Report Kit"

From Hackerspace ACKspace
Jump to: navigation, search
m
Line 1: Line 1:
 
{{Project
 
{{Project
|State=Active
+
|State=Stalled
 
|Members=PsychiC, xopr
 
|Members=PsychiC, xopr
 
|Description=Field Report Kit
 
|Description=Field Report Kit
 
}}
 
}}
 
 
== synopsis ==
 
== synopsis ==
 
If we want field reporting on the CCC camp, we quickly need a kit that provides us that service.
 
If we want field reporting on the CCC camp, we quickly need a kit that provides us that service.

Revision as of 20:12, 22 September 2011

Project: Field Report Kit
Featured:
State Stalled
Members PsychiC, xopr
GitHub No GitHub project defined. Add your project here.
Description Field Report Kit
Picture
No project picture! Fill in form Picture or Upload a jpeg here

synopsis

If we want field reporting on the CCC camp, we quickly need a kit that provides us that service.

Our first option was to use the available wifi, but since the link quality is unsure, we asked CoolePascal for a possible solution. He opted for the PMR 446MHz with boosted power and bandwidth. Since we only have a couple of weeks left, and our video transceiver kits were unusable, we're taking the shortcut by connecting a reporter kit directly to a DECT handset.

implementation

transmitter

  • use a DECT handset
  • solder a 3.5mm 4p jack contra (TRRS) onto it, according to the Nokia standard: 1-Left, 2-Right, 3-Mic, 4-Common. Note that iPwn has the Gnd and Mic mixed up.

kit

  • create an amplifier for reporter feedback, and connect the jack to the kit using a poor-man's mixer (i.e. resistors)

FieldReporterKit.jpg The kit still needs some work (see todo), but it should work like this:

  • left socket is an unbalanced 6.3mm jack/XLR combo connector to connect a dynamic microphone to it
  • right socket is the 6.3mm headphone connector
  • (todo) potentiometer defines the feedback volume
  • switch powers the kit on/off (displayed by the led)
  • (todo) 3.5mm TRRS plug connects to the transceiver (DECT/GSM handset)

todo

  • create a working connector, preferably 4p 3.5mm jack contra to a DECT handset

Note that impedance and amplification and the like might not be optimal for connecting a dynamic microphone and headphones to the handset

  • connect the TRRS plug to the kit using resistors (TBD)
  • connect the potentiometer before the amplifier (check if it has impact on the transceiver signal)
  • acquire 9v batteries