Difference between revisions of "Network information"

From Hackerspace ACKspace
Jump to: navigation, search
(VLAN 200 (LAN))
(Static IPs used)
Line 25: Line 25:
  
 
====== Static IPs used ======
 
====== Static IPs used ======
*192.168.1.1: Firewall
+
*192.168.1.1: stAckwall (PfSense firewall)
 
*192.168.1.2: Linksys router
 
*192.168.1.2: Linksys router
 
*192.168.1.3: debbie-downer IPMI interface (kan je aanspreken via Linux package ipmitool)
 
*192.168.1.3: debbie-downer IPMI interface (kan je aanspreken via Linux package ipmitool)

Revision as of 21:23, 29 January 2022


synopsis

I've (xopr) created this network information page mainly because no-one knows the current setup by heart, and I'm preparing for Congress everywhere without breaking people's precious downloads..

current setup

Address Spaces

VLAN 200 (LAN)

  • 192.168.1.1-49: static IPs
  • 192.168.1.50-199: standard DHCP scope
  • 192.168.1.200-254: DHCP reservations
Static IPs used
  • 192.168.1.1: stAckwall (PfSense firewall)
  • 192.168.1.2: Linksys router
  • 192.168.1.3: debbie-downer IPMI interface (kan je aanspreken via Linux package ipmitool)
  • 192.168.1.4: TP-link router (openWRT)
  • 192.168.1.10: Management IP hAckswitch
  • 192.168.1.11: Management IP stAckswitch
  • 192.168.1.12: Management IP slAckswitch
  • 192.168.1.42: VoIP/MQTT VM

Management IPs

  • stAckwall: 192.168.1.1
  • Hackspace: 192.168.1.10
  • Stackspace: 192.168.1.11
  • Slackspace: 192.168.1.12

Network Schematic

Netlayout.png

connections

slACKswitch

Probably connected to fuse group A.

VLAN 2u 2u 2u 2u 2u 2u 2u 2u
Port 1 3 5 7 9 11 13 15
Port 2 4 6 8 10 12 14 16: Trunk 3
VLAN 2u 2u 2u 2u 2u 2u 2u trunk

hACKswitch

Connected to fuse group A.

VLAN 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u trunk trunk
Port 1 3 5 7 9 11 13 14 17: VoIP 19: VoIP 21 23: stAkcswitch
Port 2 4 6 8 10 12 14 16 18 20 22: slAckswitch 24: WAN uplink
VLAN 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u trunk 100u

stAckswitch

VLAN 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u Trunk 200u 200u 200u 200u 200u
Port 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37: stAckwall 39 41 43 45 47
Port 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48: hAckswitch
VLAN 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u 200u Trunk

router

The Linksys router is connected to both fuse groups A and B (via two adapters and a schottky diode splitter).

It is running stock firmware to ensure basic internet connectivity in the space. Config is kept KISS for this reason.

VLAN NC 200u 200u 200u 200u
Port NC 1 2 3 4

Spacenet AP

Configured all ports as a switch. DHCP disabled. At this point only used for spacenet and can be used for experiments. Runs OpenWRT.

VLAN 200u 200u 200u 200u 200u
Port WAN 1 2 3 4

Legend

WAN / unsecured
DMZ / VPN
VoIP / telephony
trunk / backbone
LAN
test / special
servers / core infra
wireless / guest

notes

  • Da Syntax and xopr redid all the cabling on February 13th 2016. All static cables are labeled on both sides, tucked away thoroughly, trimmed, and plugged in documented ports. Please keep the label on (and updated) at all times. You can find the label-tywraps in the network-connector box in the stACKspace.
    Want to connect something? No problem; just pick any free port (except port 18 (DMZ), that won't work).
    Want a permanent connection? Should be no problem; make sure everyone is informed (via the discussion page, for example, so we can reach consensus).

also see