Revision as of 21:55, 23 September 2016

information

There are several ATA's laying in ACKspace

(0x.|10xx|112|116xxx|12xx|13xx|14x.|15x.|16xx|17x.|18x.|19xx|2222|2x.|[3-8]x.|9<:@gw1>S0)

A general Sipura dial plan looks like (assume the numbers are subscripts)

(<a1:b1>c1<:@gwX1>|<a2:b2>c2<:@gwX2>|...)

char	description
<a:b>	optional substitution; replace a with b (to remove, remove b, to prefix, remove a)
<0:0031>	replace 0 with 0031
<:003145>	prefix 003145 to the number
<9:>	remove initial 9
<9,:>	remove initial 9 and present different dial tone
c	These characters can be:
*	means the star (asterisk) key
#	means the pound (hash) key
x	means a single digit (0 through 9)
[x-y]	means any digits x through y.
[xy]	means the digits x and y (can put any number of digits here)
.	means repeat the previously listed digit type zero or more times. For example x. means "zero or more digits," xx. means "one or more digits."
<:@gwX>	Optional, (SPA-3000 only): dial out using the defined gateway
<:@gw0>	dial out using the PSTN port
<:@gw1>	dial out using gateway 1
S0	is usually used at the end of a dial plan string that says "immediately dial when matched." Used for things like emergency numbers.
!	is used at the end of the dial plan and it means "immediately reject the number dialed." Used to block, say, paid service numbers.

immediately dial extension 1000 when the phone is offhook

(<:1000>S0)

2x FxS

The following settiings are needed:

1x FxS, 1x FxO

The following settiings are needed:

factory reset:

#991*15901590*

Also see: Fritz!Box

@@ Line 2: / Line 2: @@
 There are several ATA's laying in ACKspace
-== Sipura / Linksys ==
+= Sipura / Linksys =
-=== current dialplan ===
+== current dialplan ==
   (0x.|10xx|112|116xxx|12xx|13xx|14x.|15x.|16xx|17x.|18x.|19xx|2222|2x.|[3-8]x.|9<:@gw1>S0)
@@ Line 71: / Line 71: @@
-==== Examples ====
+=== Examples ===
 immediately dial extension 1000 when the phone is offhook
   (<:1000>S0)
-=== command reference ===
+== command reference ==
 {| class="wikitable"
 ! scope="col" | code
@@ Line 94: / Line 94: @@
 |}
-=== Linksys PAP2T ===
+== Linksys PAP2T ==
 x <abbr title="Foreign exchange Station">FxS</abbr>
-=== Sipura SPA3000 ===
+<onlyinclude>{{#ifeq:{{{transcludesection|connecting_PAP2T}}}|connecting_PAP2T|
+=== connecting the [[Telephone_system:Analog_Telephone_Adapter#Linksys_PAP2T|Linksys PAP2T]] ===
+The following settiings are needed:
+* TBD
+}}</onlyinclude>
+== Sipura SPA3000 ==
 x <abbr title="Foreign exchange Station">FxS</abbr>, 1x <abbr title="Foreign exchange Office">FxO</abbr>
+<onlyinclude>{{#ifeq:{{{transcludesection|connecting_SPA3000}}}|connecting_SPA3000|
+=== connecting the [[Telephone_system:Analog_Telephone_Adapter#Sipura_SPA3000|Sipura SPA3000]] ===
+The following settiings are needed:
+* TBD
+}}</onlyinclude>
 == Fritz!box 7170 ==