Telephone system:Analog Telephone Adapter

From Hackerspace ACKspace
Revision as of 23:13, 29 January 2012 by Xopr (talk | contribs) (added fritz!box 7170 info)
Jump to: navigation, search

information

There are several ATA's laying in ACKspace

current dialplan

(0x.|10xx|112|116xxx|12xx|13xx|14x.|15x.|16xx|17x.|18x.|19xx|2222|2x.|[3-8]x.|9<:@gw1>S0)

A general Sipura dial plan looks like (assume the numbers are subscripts)


(<a1:b1>c1<:@gwX1>|<a2:b2>c2<:@gwX2>|...)


char description
<a:b> optional substitution; replace a with b (to remove, remove b, to prefix, remove a)
<0:0031> replace 0 with 0031
<:003145> prefix 003145 to the number
<9:> remove initial 9
<9,:> remove initial 9 and present different dial tone
c These characters can be:
* means the star (asterisk) key
# means the pound (hash) key
x means a single digit (0 through 9)
[x-y] means any digits x through y.
[xy] means the digits x and y (can put any number of digits here)
. means repeat the previously listed digit type zero or more times. For example x. means "zero or more digits," xx. means "one or more digits."
<:@gwX> Optional, (SPA-3000 only): dial out using the defined gateway
<:@gw0> dial out using the PSTN port
<:@gw1> dial out using gateway 1
S0 is usually used at the end of a dial plan string that says "immediately dial when matched." Used for things like emergency numbers.
! is used at the end of the dial plan and it means "immediately reject the number dialed." Used to block, say, paid service numbers.


Examples

immediately dial extension 1000 when the phone is offhook

(<:1000>S0)


hardware

command reference

code function
**** configuration menu
110# say IP address
732668# reboot
...

Linksys PAP2T

2x FxS

Sipura SPA3000

1x FxS, 1x FxO

Fritz!box 7170

  • adsl internet routing or network routing on ethernet port 1
  • 1x FxO
  • 3x FxS with pulse dialing support
  • 1x S0 (S/T) bus

factory reset:

#991*15901590*