Difference between revisions of "WiFi to 433/IR bridge"

From Hackerspace ACKspace
Jump to: navigation, search
(Created page with "{{Project |State=Active |Members=Da Syntax |Description=Building a WiFi to 433MHz and ir bridge for cheap domotics }} Used hardware for a test setup - Arduino Uno - ESP8266...")
 
Line 5: Line 5:
 
}}
 
}}
 
Used hardware for a test setup
 
Used hardware for a test setup
- Arduino Uno
+
* Arduino Uno
- ESP8266 module
+
* ESP8266 module
- 433MHz transmitter (http://www.hobbyelectronica.nl/product/433mhz-rf-ontvanger-zender-set/)
+
* 433MHz transmitter (http://www.hobbyelectronica.nl/product/433mhz-rf-ontvanger-zender-set/)
  
 
The test setup build with the above mentioned parts worked. The next step is to get rid of the Arduino and add an IR led so it can control my ampifier. When that is working I will try to build a cleaner setup and document it here.
 
The test setup build with the above mentioned parts worked. The next step is to get rid of the Arduino and add an IR led so it can control my ampifier. When that is working I will try to build a cleaner setup and document it here.

Revision as of 15:41, 8 February 2016

Project: WiFi to 433/IR bridge
Featured:
State Active
Members Da Syntax
GitHub No GitHub project defined. Add your project here.
Description Building a WiFi to 433MHz and ir bridge for cheap domotics
Picture
No project picture! Fill in form Picture or Upload a jpeg here

Used hardware for a test setup

The test setup build with the above mentioned parts worked. The next step is to get rid of the Arduino and add an IR led so it can control my ampifier. When that is working I will try to build a cleaner setup and document it here.