Difference between revisions of "WiFi to 433/IR bridge"

From Hackerspace ACKspace
Jump to: navigation, search
Line 8: Line 8:
 
* ESP8266 module
 
* ESP8266 module
 
* 433MHz transmitter (http://www.hobbyelectronica.nl/product/433mhz-rf-ontvanger-zender-set/)
 
* 433MHz transmitter (http://www.hobbyelectronica.nl/product/433mhz-rf-ontvanger-zender-set/)
 +
* Cheap 433MHz remote switches from the Action. Working with the following lib https://bitbucket.org/fuzzillogic/433mhzforarduino/wiki/Home
  
 
The test setup build with the above mentioned parts worked. The next step is to get rid of the Arduino and add an IR led so it can control my ampifier. When that is working I will try to build a cleaner setup and document it here.
 
The test setup build with the above mentioned parts worked. The next step is to get rid of the Arduino and add an IR led so it can control my ampifier. When that is working I will try to build a cleaner setup and document it here.

Revision as of 15:47, 8 February 2016

Project: WiFi to 433/IR bridge
Featured:
State Active
Members Da Syntax
GitHub No GitHub project defined. Add your project here.
Description Building a WiFi to 433MHz and ir bridge for cheap domotics
Picture
No project picture! Fill in form Picture or Upload a jpeg here

Used hardware for a test setup

The test setup build with the above mentioned parts worked. The next step is to get rid of the Arduino and add an IR led so it can control my ampifier. When that is working I will try to build a cleaner setup and document it here.