Difference between revisions of "2ABU6-G1"
(Created initial page with some logs) |
(added pinout) |
||
| Line 6: | Line 6: | ||
}} | }} | ||
A.K.A. Minew, MS93MFZ_V1.0, MS93MF6_V1.2, MT7628, Thingoo, 2ABU6-G1 | A.K.A. Minew, MS93MFZ_V1.0, MS93MF6_V1.2, MT7628, Thingoo, 2ABU6-G1 | ||
| + | Thanks to Monadnock for a lot of the pin labels | ||
| − | + | === connecting UART === | |
| + | /!\ don't connect PoE and UART, you will fry the main board | ||
| + | |||
| + | use 3.3V logic to be safe | ||
| + | |||
| + | === updating firmware === | ||
| + | * login to the router (http) | ||
| + | * go to tab <code>Other</code> (the last tab) | ||
| + | * scroll to <code>FIRMWARE UPGRADE</code> | ||
| + | ** either choose USB and put the firmware as <code>thingoo-upgrade.bin</code> on the root of a USB stick | ||
| + | ** or choose put the firmware on a (local) webserver and fill in its URL | ||
| + | === troubleshooting === | ||
| + | * ModemManager | ||
| + | * Hardware flow control | ||
| + | * shorts | ||
=== pins and connectors === | === pins and connectors === | ||
==== J1 ==== | ==== J1 ==== | ||
SoM row near the UART (J8) header | SoM row near the UART (J8) header | ||
| − | # USB | + | # USB D- |
| − | # USB | + | # USB D+ |
# GND | # GND | ||
| − | # | + | # SD_D2 (MDI_TN_P4) |
| − | # | + | # SD_D3 (MDI_TP_P4) |
| − | # | + | # SD_CMD (MDI_RN_P4) |
| − | # | + | # SD_CLK (MDI_RP_P4) |
| − | # | + | # SD_CD (MDI_TN_P3) |
| − | # | + | # SD_WP (MDI_TP_P3) |
| − | # | + | # SD_D0 (MDI_RN_P3) |
| − | # | + | # SD_D1 (MDI_RP_P3) |
| − | # ETH | + | # ETH TXON0 (MDI_TN_P0) |
| − | # ETH | + | # ETH TXOP0 (MDI_TP_P0) |
| − | # ETH | + | # ETH RXIN0 (MDI_RN_P0) |
| − | # ETH | + | # ETH RXIP0 (MDI_RP_P0) |
# GND | # GND | ||
| − | # | + | # UART_RXD0 (GPIO#13) |
| − | # | + | # UART_TXD0 (GPIO#12) |
| − | # PWM_CH0 (testpoint T11) | + | # PWM_CH0 (GPIO#11, testpoint T11) |
==== J1 ==== | ==== J1 ==== | ||
SoM row near the SD card slot | SoM row near the SD card slot | ||
| − | # | + | # I2C_SD (GPIO#5) |
| − | # | + | # I2C_SCLK (GPIO#4) |
| − | # | + | # I2S_CLK (GPIO#3) |
| − | # | + | # I2S_WS (GPIO#2) |
| − | # | + | # I2S_DO (GPIO#1) |
| − | # | + | # I2S_DI (GPIO#0) |
| − | # | + | # GND |
| − | # | + | # UART_RXD1 (GPIO#46) |
| − | # | + | # UART_TXD1 (GPIO#45) |
| − | # | + | # WLED_N (GPIO#44) |
| − | # LED1 (GPIO43, active high) | + | # LINK0 LED1 (GPIO43, active high) |
| − | # | + | # LINK3 |
| − | # | + | # LINK4 |
| − | # | + | # WPS_RES_PBC |
| − | # | + | # REF_CLKO (GPIO#38) |
| − | # | ||
# GND | # GND | ||
# GND | # GND | ||
| Line 60: | Line 74: | ||
UART, presumably 3.3v | UART, presumably 3.3v | ||
| − | # Vin (tied to U10-8, EML3276 near SW2, also to testpoint DC4.5V=T20 via | + | # Vin (tied to U10-8, EML3276 near SW2, also to testpoint DC4.5V=T20 via switch J13 in on-position) |
# RxD | # RxD | ||
# TxD | # TxD | ||
| Line 84: | Line 98: | ||
* [https://blog.monadnock.ca/minew-ble-wifi-gateway-documentation Monadnock consultancy community blog] | * [https://blog.monadnock.ca/minew-ble-wifi-gateway-documentation Monadnock consultancy community blog] | ||
* [https://fccid.io/2ABU6-G1 FCC entry] | * [https://fccid.io/2ABU6-G1 FCC entry] | ||
| + | * [https://nl.aliexpress.com/item/32816761993.html reference] [https://nl.aliexpress.com/item/32825672226.html designs] compared to the FCC internal pictures and Monadnock's pinout | ||
Revision as of 15:14, 21 July 2021
| Project: 2ABU6-G1 | |
|---|---|
| Featured: | Yes |
| State | Active |
| Members | User:Da Syntax, User:Xopr |
| GitHub | No GitHub project defined. Add your project here. |
| Description | Minew BLE/Wifi Gateway |
| Picture | |
| No project picture! Fill in form Picture or Upload a jpeg here | |
A.K.A. Minew, MS93MFZ_V1.0, MS93MF6_V1.2, MT7628, Thingoo, 2ABU6-G1 Thanks to Monadnock for a lot of the pin labels
Contents
connecting UART
/!\ don't connect PoE and UART, you will fry the main board
use 3.3V logic to be safe
updating firmware
- login to the router (http)
- go to tab
Other(the last tab) - scroll to
FIRMWARE UPGRADE- either choose USB and put the firmware as
thingoo-upgrade.binon the root of a USB stick - or choose put the firmware on a (local) webserver and fill in its URL
- either choose USB and put the firmware as
troubleshooting
- ModemManager
- Hardware flow control
- shorts
pins and connectors
J1
SoM row near the UART (J8) header
- USB D-
- USB D+
- GND
- SD_D2 (MDI_TN_P4)
- SD_D3 (MDI_TP_P4)
- SD_CMD (MDI_RN_P4)
- SD_CLK (MDI_RP_P4)
- SD_CD (MDI_TN_P3)
- SD_WP (MDI_TP_P3)
- SD_D0 (MDI_RN_P3)
- SD_D1 (MDI_RP_P3)
- ETH TXON0 (MDI_TN_P0)
- ETH TXOP0 (MDI_TP_P0)
- ETH RXIN0 (MDI_RN_P0)
- ETH RXIP0 (MDI_RP_P0)
- GND
- UART_RXD0 (GPIO#13)
- UART_TXD0 (GPIO#12)
- PWM_CH0 (GPIO#11, testpoint T11)
J1
SoM row near the SD card slot
- I2C_SD (GPIO#5)
- I2C_SCLK (GPIO#4)
- I2S_CLK (GPIO#3)
- I2S_WS (GPIO#2)
- I2S_DO (GPIO#1)
- I2S_DI (GPIO#0)
- GND
- UART_RXD1 (GPIO#46)
- UART_TXD1 (GPIO#45)
- WLED_N (GPIO#44)
- LINK0 LED1 (GPIO43, active high)
- LINK3
- LINK4
- WPS_RES_PBC
- REF_CLKO (GPIO#38)
- GND
- GND
- VDD (3.5v, testpoint T2)
- VDD (3.5v, testpoint T2)
J8
UART, presumably 3.3v
- Vin (tied to U10-8, EML3276 near SW2, also to testpoint DC4.5V=T20 via switch J13 in on-position)
- RxD
- TxD
- GND
J12
related to nRF52
- GND
- V (3.3v, same potential as T23)
- D ?
- C ?
- Reset?
CON1
IPEX/UFL for Bluetooth, connected to the middle antenna
CON2
Ribbon connector to WS2812 LEDs, flip up to release
also see
- product page
- Monadnock consultancy community blog
- FCC entry
- reference designs compared to the FCC internal pictures and Monadnock's pinout
