Difference between revisions of "Polycom"
(added default passcode and the fact that it has an https interface) |
(added barrel jack and aux/header info) |
||
Line 1: | Line 1: | ||
+ | {{PoE | ||
+ | |Barrel_plug=5.5/2.5 | ||
+ | |Barrel_voltage=48V | ||
+ | |802:3af_straight=yes | ||
+ | |802:3af_crosslink=unknown | ||
+ | |Legacy_straight=unknown | ||
+ | |Legacy_crosslink=unknown | ||
+ | |Compatible_straight=unknown | ||
+ | |Compatible_crosslink=unknown | ||
+ | |Unifi_straight=unknown | ||
+ | |Unifi_crosslink=unknown | ||
+ | |Note= | ||
+ | }} | ||
== VVX 301 == | == VVX 301 == | ||
Line 4: | Line 17: | ||
* This device can handle 401: unauthorized | * This device can handle 401: unauthorized | ||
* webinterface available at https://<ip> | * webinterface available at https://<ip> | ||
+ | * has 6P6C (RJ12) AUX port | ||
+ | * has 5 pin (0.1" 3x2 with notch) female header | ||
+ | * both AUX and header pins 5 are connected (GND?): RJ12 second right, header, first left at the top | ||
=== factory reset === | === factory reset === |
Revision as of 10:21, 28 January 2022
Power (over Ethernet) compatibility:
barrel plug: 5.5/2.5 48V
straight | crosslink | |
---|---|---|
802.3af | yes | unknown |
legacy | unknown | unknown |
compatible | unknown | unknown |
Unifi | unknown | unknown |
Note:
VVX 301
- Default passcode:
456
- This device can handle 401: unauthorized
- webinterface available at https://<ip>
- has 6P6C (RJ12) AUX port
- has 5 pin (0.1" 3x2 with notch) female header
- both AUX and header pins 5 are connected (GND?): RJ12 second right, header, first left at the top
factory reset
- power up the phone
- Wait for
Starting application. press Cancel to interrupt
and press Cancel - at the countdown screen, press and hold 1+5+3 for >3 seconds
- enter the MAC address (without colons) as password (old style sms-mode; note that for entering digits or characters, you need to set the correct input type. Also it's not case sensitive)
TODO
- minimum web-setup
- AUX port pinout
- deployment server