Difference between revisions of "WiPhone"
m (added category bingo) |
(added arduino steps and UDP property) |
||
| Line 6: | Line 6: | ||
Yay, [https://wiphone.io WiPhone!] | Yay, [https://wiphone.io WiPhone!] | ||
| − | + | == Get started == | |
| − | <code>#define RF95_FREQ 868.0</code> ([https://github.com/ESP32-WiPhone/wiphone-firmware/issues/24 See this (somewhat sparse) issue]) | + | * download source code |
| + | * run <code>V="0.8.30"; unzip WiPhone-$V && rm -fr WiPhone && mv WiPhone-$V WiPhone</code> | ||
| + | * open <code>WiPhone/WiPhone.ino</code> using Arduino | ||
| + | * once: set up IDE (see [https://wiphone.io/docs/WiPhone/latest/technical_manual/software/programming_manual.html documentation] for details): | ||
| + | ** Open preferences ({{K|CTRL}}+{{K|,}}) and add https://wiphone.io/static/releases/arduino_platforms/package_WiPhone_index.json (comma separated) into Additional Boards Manager URLs | ||
| + | ** go to Tools » Boards » Board Manager and install <code>WiPhone</code> | ||
| + | ** TODO: https://github.com/me-no-dev/arduino-esp32fs-plugin/releases/download/1.0/ESP32FS-1.0.zip | ||
| + | ** TODO: esptool.py serial: <code>sudo pip install pyserial</code> (check your default python version) | ||
| + | * Select Tools » Boards » Wiphone » Wiphone arduino | ||
| + | * compile with ({{K|CTRL}}+{{K|r}}) | ||
| + | |||
| + | === notes === | ||
| + | * read [https://wiphone.io/docs/WiPhone/latest/ documentation here] | ||
| + | * report bugs at https://github.com/ESP32-WiPhone/wiphone-firmware/issues | ||
| + | * enable/disable automatic firmware settings at <code>Menu</code> » <code>Settings</code> » <code>Firmware settings</code> | ||
| + | * before you use LoRa, make sure to edit <code>Hardware.h</code>, look for <code>RF95_FREQ</code> and set it to 868MHz for EU: | ||
| + | :<code>#define RF95_FREQ 868.0</code> ([https://github.com/ESP32-WiPhone/wiphone-firmware/issues/24 See this (somewhat sparse) issue]) | ||
| + | * enable UDP by adding <code>u=UDP_SIP</code> to an account in <code> data/sip_accounts.ini</code> (not yet tested) | ||
| − | |||
| − | |||
| − | |||
=== custom mods === | === custom mods === | ||
Revision as of 14:53, 12 August 2022
| Project: WiPhone | |
|---|---|
| Featured: | No |
| State | Active |
| Members | Vicarious, Stuiterveer, xopr |
| GitHub | No GitHub project defined. Add your project here. |
| Description | |
| Picture | |
| No project picture! Fill in form Picture or Upload a jpeg here | |
Yay, WiPhone!
Contents
Get started
- download source code
- run
V="0.8.30"; unzip WiPhone-$V && rm -fr WiPhone && mv WiPhone-$V WiPhone - open
WiPhone/WiPhone.inousing Arduino - once: set up IDE (see documentation for details):
- Open preferences (CTRL+,) and add https://wiphone.io/static/releases/arduino_platforms/package_WiPhone_index.json (comma separated) into Additional Boards Manager URLs
- go to Tools » Boards » Board Manager and install
WiPhone - TODO: https://github.com/me-no-dev/arduino-esp32fs-plugin/releases/download/1.0/ESP32FS-1.0.zip
- TODO: esptool.py serial:
sudo pip install pyserial(check your default python version)
- Select Tools » Boards » Wiphone » Wiphone arduino
- compile with (CTRL+r)
notes
- read documentation here
- report bugs at https://github.com/ESP32-WiPhone/wiphone-firmware/issues
- enable/disable automatic firmware settings at
Menu»Settings»Firmware settings - before you use LoRa, make sure to edit
Hardware.h, look forRF95_FREQand set it to 868MHz for EU:
#define RF95_FREQ 868.0(See this (somewhat sparse) issue)
- enable UDP by adding
u=UDP_SIPto an account indata/sip_accounts.ini(not yet tested)
