Telephone system:Cisco phone deployment

From Hackerspace ACKspace
Revision as of 22:23, 29 January 2012 by Xopr (talk | contribs) (updated cisco phone deployment info)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Most settings are taken from Xopr's Asus WL500g running OpenWRT kamikaze RC6 with pivot-rooted USB drive and OpenVPN tunnel. (there's not enough room to host the firmware's on the flash ;) TODO: copy the settings from the ACKspace setup

DHCP

dnsmasq

small part in /etc/dnsmasq.conf 

dhcp-option=66,LOCAL_TFTPD_IP
dhcp-option=150,LOCAL_TFTPD_IP

Note: when setting the TFT server using command line parameters, don't use extra (escaped) quotes: small part in /etc/init.d/S50dnsmasq (uncomment the args to enable the config file mentioned above 

args="-K -F $START,$END,$NETMASK,${lease:-12h} --dhcp-option=66,${ipaddr} --dhcp-option=150,${ipaddr}"

TFTP

atftpd

cat /etc/init.d/S55atftpd
#!/bin/sh
/usr/sbin/atftpd --daemon --port 69 --tftpd-timeout 300 --retry-timeout 5 --mcast-port 1758 --mcast-addr 239.239.239.0-255 --mcast-ttl 1 --maxthread 100

contents of /tftpboot 

dialplan.xml
OS79XX.TXT
P00308000600.bin
P00308000600.loads
P00308000600.sb2
P00308000600.sbn
P00405000700.bin                      
P00405000700.sbn
P0S3-06-3-00.bin
P0S3-8-12-00.loads
P0S3-06-3-00.sbn
P0S3-8-12-00.sb2
RINGLIST.DAT
S00105000300.sbn
SIPDefault.cnf
SEP<mac_of_sccp_phone_w_ext>.cnf.xml
SIP<mac_of_sip_phone>.cnf
XMLDefault.cnf.xml

File contents

dialplan.xml

<DIALTEMPLATE>
    <TEMPLATE MATCH="\*..#"            Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="\**#"             Timeout="3" User="Phone"/> 
    <TEMPLATE MATCH="\*...#"           Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="\**#"             Timeout="3" User="Phone"/> 
    <TEMPLATE MATCH="\*..#"            Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="\*#..#"           Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="\*#...#"          Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="#..#"             Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="#...#"            Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="00*"              Timeout="6" User="Phone"/> 
    <TEMPLATE MATCH="0........."       Timeout="1" User="Phone"/> 
    <TEMPLATE MATCH="10.."             Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="12.."             Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="13.."             Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="131.........."    Timeout="1" User="Phone"/> 
    <TEMPLATE MATCH="#31#.........."   Timeout="1" User="Phone"/> 
    <TEMPLATE MATCH="\*31\*.........." Timeout="1" User="Phone"/> 
    <TEMPLATE MATCH="132.........."    Timeout="1" User="Phone"/> 
    <TEMPLATE MATCH="\*10.."           Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="\*19.."           Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="19.."             Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="2222"             Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="4444"             Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="112"              Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="911"              Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="999"              Timeout="0" User="Phone"/> 
    <TEMPLATE MATCH="*"                Timeout="4" User="Phone"/> 
</DIALTEMPLATE>

OS79XX.TXT

P0S3-06-3-00

RINGLIST.DAT

CTU	CTU24raw.raw
Chicken	chicken2.raw
New York	newyork.raw
Star Wars	starwars.raw
Old Style	ringer1.pcm
Synth Low	ringer2.pcm

SIPDefault.cnf

# Image Version
#image_version: "P0S3-8-12-00"

# Proxy Server
proxy1_address: "FREESWITCH_IP"

# Proxy Server Port (default - 5060)
proxy1_port:"5060"

# Emergency Proxy info
proxy_emergency: "FREESWITCH_IP"
proxy_emergency_port: "5060"

# Backup Proxy info
proxy_backup: "FREESWITCH_IP"
proxy_backup_port: "5060"

# Outbound Proxy info
outbound_proxy: "FREESWITCH_IP"
outbound_proxy_port: "5060"

# NAT/Firewall Traversal
nat_enable: "1" # Only enable when using the OpenVPN tunnel; remote office
nat_address: "10.0.50.13" # TODO: try and remove it from either this or the specific config

voip_control_port: "5061"
start_media_port: "16384"
end_media_port: "32766"
nat_received_processing: "0"

# Proxy Registration (0-disable (default), 1-enable)
proxy_register: "1"

# Phone Registration Expiration [1-3932100 sec] (Default - 3600)
timer_register_expires: "100" # below 120 seconds for maintaining UDP 'connection' state in Linux

# Codec for media stream (g711ulaw (default), g711alaw, g729)
preferred_codec: "none"

# TOS bits in media stream [0-5] (Default - 5)
tos_media: "5"

# Enable VAD (0-disable (default), 1-enable)
enable_vad: "0"

# Allow for the bridge on a 3way call to join remaining parties upon hangup
cnf_join_enable: "1" ; 0-Disabled, 1-Enabled (default)

# Allow Transfer to be completed while target phone is still ringing
semi_attended_transfer: "1" ; 0-Disabled, 1-Enabled (default)

# Telnet Level (enable or disable the ability to telnet into this phone
telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged

# Inband DTMF Settings (0-disable, 1-enable (default))
dtmf_inband: "1"

# Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt ) dtmf_outofband: "avt" ~np~# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up)
dtmf_db_level: "3"

# SIP Timers
timer_t1: "500" ; Default 500 msec
timer_t2: "4000" ; Default 4 sec
sip_retx: "10" ; Default 11
sip_invite_retx: "6" ; Default 7
timer_invite_expires: "180" ; Default 180 sec

# Setting for Message speeddial to mail box (*97)
messages_uri: "1233"

# TFTP Phone Specific Configuration File Directory
tftp_cfg_dir: "./"

# Time Server
sntp_mode: "unicast"
sntp_server: "time.nist.gov" # IP address here alternatively
time_zone: "CET"
dst_offset: "1"
dst_start_month: "April"
dst_start_day: ""
dst_start_day_of_week: "Sun"
dst_start_week_of_month: "1"
dst_start_time: "02"
dst_stop_month: "Oct"
dst_stop_day: ""
dst_stop_day_of_week: "Sunday"
dst_stop_week_of_month: "8"
dst_stop_time: "2"
dst_auto_adjust: "1"

# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control)
dnd_control: "0" ; Default 0 (Do Not Disturb feature is off)

# Caller ID Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
callerid_blocking: "0" ; Default 0 (Disable sending all calls as anonymous)

# Anonymous Call Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
anonymous_call_block: "0" ; Default 0 (Disable blocking of anonymous calls)

# Call Waiting (0-disabled, 1-enabled, 2-disabled with no user control, 3-enabled with no user control)
call_waiting: "1" ; Default 1 (Call Waiting enabled)

# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
dtmf_avt_payload: "101" ; Default 100

# XML file that specifies the dialplan desired
dial_template: "dialplan"

# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"

#Autocompletion During Dial (0-off, 1-on [default])
autocomplete: "0"

#Time Format (0-12hr, 1-24hr [default])
time_format_24hr: "0"

# URL for external Phone Services
services_url: "http://FREESWITCH_IP/provisioning/services.php" # IP address here alternatively

# URL for external Directory location
directory_url: "http://FREESWITCH_IP/provisioning/directory.php" # IP address here alternatively

# URL for branding logo
logo_url: "http://FREESWITCH_IP/provisioning/ACKspace.bmp" # IP address here alternatively

# Remote Party ID
remote_party_id: 1 ; 0-Disabled (default), 1-Enabled

SEP<mac_of_sccp_phone_w_ext>.cnf.xml

<device>
  <devicePool>
    <callManagerGroup>
      <members>
        <member priority="0">
          <callManager>
            <ports>
              <ethernetPhonePort>2000</ethernetPhonePort>
            </ports>
            <processNodeName>LOCAL_FREESWITCH_IP</processNodeName>
          </callManager>
        </member>
      </members>
    </callManagerGroup>
  </devicePool>
  <versionStamp>{Jan 01 2002 00:00:00}</versionStamp>
  <loadInformation>P00308000600</loadInformation>
  <addOnModules>
    <addOnModule idx="1">
      <loadInformation>S00105000300</loadInformation>
    </addOnModule>
  </addOnModules>
  <userLocale>
    <name>English_United_States</name>
    <langCode>en</langCode>
  </userLocale>
  <networkLocale>United_States</networkLocale>
  <idleTimeout>0</idleTimeout>
  <authenticationURL></authenticationURL>
  <directoryURL></directoryURL>
  <idleURL></idleURL>
  <informationURL></informationURL>
  <messagesURL></messagesURL>
  <proxyServerURL></proxyServerURL>
  <servicesURL></servicesURL>
</device>

SIP<mac_of_sip_phone>.cnf

# SIP Configuration Generic File

# Image Version
image_version: P0S3-8-12-00
phone_label: "BLACK_BAR_NAME"

# Line 1 appearance
line1_displayname: "CALLER_ID_NAME"
line1_shortname:"BUTTON_NAME"
line1_name: EXTENSION_NUMBER
line1_authname: "EXTENSION_NUMBER"
line1_password: "EXTENSION_PASSWORD"

# Line 2 appearance
line2_displayname: "INTERCOM_ID_NAME"
line2_shortname: "BUTTON_INTERCOM_NAME"
line2_name: INTERCOM_NAME_NUMBER
line2_authname: "INTERCOM_NAME_NUMBER"
line2_password: "INTERCOM_PASSWORD"

# Line 3 appearance
line3_displayname: ""
line3_shortname: ""
line3_name: UNPROVISIONED
line3_authname: "UNPROVISIONED"
line3_password: "UNPROVISIONED"

# Line 4 appearance
line4_displayname: ""
line4_shortname: ""
line4_name: UNPROVISIONED
line4_authname: "UNPROVISIONED"
line4_password: "UNPROVISIONED"

# Line 5 appearance
line5_displayname: ""
line5_shortname: ""
line5_name: UNPROVISIONED
line5_authname: "UNPROVISIONED"
line5_password: "UNPROVISIONED"

# Line 6 appearance
line6_displayname: ""
line6_shortname: ""
line6_name: UNPROVISIONED
line6_authname: "UNPROVISIONED"
line6_password: "UNPROVISIONED"

# Phone Prompt (The prompt that will be displayed on console and telnet)
phone_prompt: "SIP Phone" ; Limited to 15 characters (Default - SIP Phone)

# Phone Password (Password to be used for console or telnet login)
phone_password: "PHONE_PASSWORD" ; Limited to 31 characters (Default - cisco)

# User classifcation used when Registering [ none(default), phone, ip ]
user_info: none

# NAT/Firewall Traversal
nat_enable: "1" # Only enable when using the OpenVPN tunnel; remote office
nat_address: "10.0.50.13" # TODO: try and remove it from either this or the generic config

timer_register_expires: "111"

XMLDefault.cnf.xml

<Default>
  <callManagerGroup>
    <members>
      <member priority="0">
        <callManager>
          <ports>
            <ethernetPhonePort>2000</ethernetPhonePort>
          </ports>
          <processNodeName>FREESWITCH_IP</processNodeName>
        </callManager>
      </member>
    </members>
    <loadInformation6 model="IP Phone 7910">P00308000600</loadInformation6>
    <loadInformation124 model="Addon 7914">S00105000300</loadInformation124>
    <loadInformation8 model="IP Phone 7940">P00308000600</loadInformation8>
  </callManagerGroup>
</Default>
Retrieved from "https://ackspace.nl/w/index.php?title=Telephone_system:Cisco_phone_deployment&oldid=1905"