WiPhone

Project: WiPhone
Featured:	Yes
State	Active
Members	Vicarious, Stuiterveer, xopr
GitHub	WiPhone build
Description
Picture
No project picture! Fill in form Picture or Upload a jpeg here

Yay, WiPhone!

Be cautious charging the WiPhone on a Xiaomi Mi Power Bank 3 Pro

xopr's WiPhone broke down: his guestimates are that the device in USB-A port 1 that supported adaptive charging might bring the second USB-A port to 9V or 12V (out of spec), which in this scenario will fry the CP2104 USB-UART chip when you would plug it in second, no matter how short the time frame would be.

custom firmware

you can use the ACKspace modified firmware by setting https://ackspace.nl/WiPhone/WiPhone.ini into the ota.ini file (or via the telephone) Current applied patches:

• LoRa 868MHz
• ackspace.nl fake NAPTR (hardcoded IP)
• fix fiddly unlock (mentioned here)

Work in progress:

• LoRa menu (currently crashes the phone, don't use)

notes

• read documentation here
• report bugs at https://github.com/ESP32-WiPhone/wiphone-firmware/issues
• enable/disable automatic firmware settings at Menu » Settings » Firmware settings
• before you use LoRa, make sure to edit Hardware.h, look for RF95_FREQ and set it to 868MHz for EU:

#define RF95_FREQ 868.0 (See this (somewhat sparse) issue)

• enable UDP by adding u=UDP_SIP to an account in data/sip_accounts.ini (not yet tested)

Get started

• download source code
• run V="0.8.30"; unzip WiPhone-$V && rm -fr WiPhone && mv WiPhone-$V WiPhone
• open WiPhone/WiPhone.ino using Arduino
• once: set up IDE (see documentation for details):
  • Open preferences (CTRL+,) and add https://wiphone.io/static/releases/arduino_platforms/package_WiPhone_index.json (comma separated) into Additional Boards Manager URLs
  • go to Tools » Boards » Board Manager and install WiPhone
  • Arduino option Tools » ESP Sketch Data Upload: download ESP32FS-1.0.zip into the ~Arduino/tools directory with mkdir -p ~/Arduino/tools && unzip ESP32FS-1.0.zip -d ~/Arduino/tools
  • TODO: esptool.py serial: sudo pip install pyserial (check your default python version)
• Select Tools » Boards » Wiphone » Wiphone arduino
• compile with (CTRL+r)

command line build

The provided repo contains several patches and a semi-automated build/upload process to create your own custom binary (without opening the Arduino IDE) This includes:

• caret cursor color fix
• lockscreen fix (mentioned here as well)
• LoRa 868MHz, menu is WIP
• ackspace.nl fake NAPTR (hardcoded IP)
• loudspeaker fix (mentioned here)

FSBrowser app

Work in progress by stuiterveer

NFC reader

Work in progress by Vicarious

5V injector

To charge the Wiphone (with 5V, including charging indicator), without using USB (since xopr's UART is broken), he soldered 2 cables with female dupont ends to the 5V rail (not VBUS). With troubleshooting, he also noted some useful pads/components, more or less reversed engineered: File:Wiphone testpads components.svg

Here is the result

• 

  Ground on the bottom pad indicating "-" 5V on the left side of the "big" resistor above the right pogo header (not yet done in the picture) Dabbed in hot glue on the solder joints and strategically slightly right/above the center polycarbonate bridge (not in picture)

• 

  Wifi antenna cover just fits on top. Dabbed in hot glue: strategically slightly right/above the center polycarbonate bridge

• 

  Female dupont connectors fit nicely through the QWIIC slot on the LoRa daughter board.

LoRa

• Meshtastic radio-settings
• RFM 95/96/97/98 datasheet (pdf)
• Adafruit Using the RFM9X Radio
• RadioHead RH_RF95 Class Reference
• LoRa channels
• LoRaWan US channels
• Semtech information page