ESP-2

Featured article

ESP-2 had been flagged as a featured article and will automatically appear on the Main Page.

Project: ESP-2
Featured:
State	Active
Members	Prodigity, Da Syntax, xopr
GitHub	No GitHub project defined. Add your project here.
Description	Playing around with cheap wifi modules
Picture
No project picture! Fill in form Picture or Upload a jpeg here

synopsis

To make the ESP8266 more accessible to everyone I have created a "programmer" which allows for easy firmware uploading and communication with the module.

Behold, the ESP^2 (esp egg salad programmer).

Revision 1.1

xopr Modified the ESP^2 a bit:

• Added three wires (VCC, GND and GPIO2) for Dallas temperature sensor debugging (wire ends are insulated)
• Added pullup resistor was added so GPIO0 can be used after the device has been booted
• Added resistor to the 5V ESP^2 TX signal (should be two diodes I guess, the resistor divider didn't work)

Todo

Find a way to program the ESP-12 (2mm pitch) modules without much hassle (note that it needs a 10k resistor between GPIO15 and GND) to boot correctly