File:Wiphone 5v solder.jpg

Summary

Ground on the bottom pad indicating "-" 5V on the left side of the "big" resistor above the right pogo header (not yet done in the picture) Dabbed in hot glue on the solder joints and strategically slightly right/above the center polycarbonate bridge (not in picture)

Licensing

You are free to

• Share — copy and redistribute the material in any medium or format
• Adapt — remix, transform, and build upon the material

for any purpose, even commercially. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms

• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
• ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.

See also: creativecommons.org/licenses/by-sa/3.0/