Difference between revisions of "Avaya"
m (repeat step on the wrong place) |
(added 46xxSettings.txt info) |
||
| Line 12: | Line 12: | ||
* at the blank screen, type {{k|mute}}{{k|7}}{{k|4}}{{k|4}}{{k|#}} (Mute SIG#, you will notice a distinct short tick when pressing mute, and other keys being silent) | * at the blank screen, type {{k|mute}}{{k|7}}{{k|4}}{{k|4}}{{k|#}} (Mute SIG#, you will notice a distinct short tick when pressing mute, and other keys being silent) | ||
* change to SIP by cycling using {{k|*}} and confirm using {{k|#}} | * change to SIP by cycling using {{k|*}} and confirm using {{k|#}} | ||
| + | |||
| + | You will need a TFTP server and the 46xxSettings.txt file (see [https://support.avaya.com/downloads/download-details.action?contentId=C2009071016160372125345&productId=P0553 Avaya's sample] and [https://gist.github.com/LeftyBC/6589411 a snippet from LeftyBC on github gist] | ||
[[Category:Telephony]] | [[Category:Telephony]] | ||
Revision as of 19:20, 2 January 2016
- only uses pins 1,2,3 + 6 (100Base-T)
- PoE compatible
- custom power module available: GND:pin 7, +48V:pin 8
- upon booting (about 20 seconds), the following message appears:
- 100 mbps ethernet (you might want to unplug the ethernet cable if the keys do not respond)
- * to program (after this step, you can plug in the ethernet connection again so you are able to type in the SIG command at the end)
- press *
- confirm every default with # (8x)
- at the end, it says "No new values. #=OK": confirm
- at the blank screen, type mute744# (Mute SIG#, you will notice a distinct short tick when pressing mute, and other keys being silent)
- change to SIP by cycling using * and confirm using #
You will need a TFTP server and the 46xxSettings.txt file (see Avaya's sample and a snippet from LeftyBC on github gist
