Difference between revisions of "Polycom"

From Hackerspace ACKspace
Jump to: navigation, search
(added default passcode and the fact that it has an https interface)
(added barrel jack and aux/header info)
Line 1: Line 1:
 +
{{PoE
 +
|Barrel_plug=5.5/2.5
 +
|Barrel_voltage=48V
 +
|802:3af_straight=yes
 +
|802:3af_crosslink=unknown
 +
|Legacy_straight=unknown
 +
|Legacy_crosslink=unknown
 +
|Compatible_straight=unknown
 +
|Compatible_crosslink=unknown
 +
|Unifi_straight=unknown
 +
|Unifi_crosslink=unknown
 +
|Note=
 +
}}
  
 
== VVX 301 ==
 
== VVX 301 ==
Line 4: Line 17:
 
* This device can handle 401: unauthorized
 
* This device can handle 401: unauthorized
 
* webinterface available at https://<ip>
 
* webinterface available at https://<ip>
 +
* has 6P6C (RJ12) AUX port
 +
* has 5 pin (0.1" 3x2 with notch) female header
 +
* both AUX and header pins 5 are connected (GND?): RJ12 second right, header, first left at the top
  
 
=== factory reset ===
 
=== factory reset ===

Revision as of 11:21, 28 January 2022

Power (over Ethernet) compatibility:
barrel plug: 5.5/2.5 48V

straight crosslink
802.3af yes unknown
legacy unknown unknown
compatible unknown unknown
Unifi unknown unknown

Note:

VVX 301

  • Default passcode: 456
  • This device can handle 401: unauthorized
  • webinterface available at https://<ip>
  • has 6P6C (RJ12) AUX port
  • has 5 pin (0.1" 3x2 with notch) female header
  • both AUX and header pins 5 are connected (GND?): RJ12 second right, header, first left at the top

factory reset

  • power up the phone
  • Wait for Starting application. press Cancel to interrupt and press Cancel
  • at the countdown screen, press and hold 1+5+3 for >3 seconds
  • enter the MAC address (without colons) as password (old style sms-mode; note that for entering digits or characters, you need to set the correct input type. Also it's not case sensitive)

TODO

  • minimum web-setup
  • AUX port pinout
  • deployment server