You do not have permission to edit this page, for the following reason:
The action you have requested is limited to users in the group: Users.
Free text:
=== synopsis === Freely translated: traffic (scam) light. Ingrediënten: * verkeerslicht * 3x[[(sl)ACKspace_v3.0|3W RGB led]] Resultaat: {{#Widget:Html5media|url={{filepath:stoplichter.mp4}}}} === new iteration === Since we have some things that speak ARTnet, it's time to upgrade the traffic light to give it 3 RGB pixels of ARTnet. The IP address is <code>192.168.1.114</code> Notes on the traffic light itself: * the rubber gaskets wrap around the light, and are then placed from the outside with the thin seal wrapped around the flange like a reversed bicycle tire operation (it's fiddly) * the current connector cabling is: Some notes on the [https://github.com/AlbertVos/bitlair-ohm2013-ledstrip-contol bitlair ART-net] used for the [[LED sleeve]]s: * they listen to universe 0 * they don't start at address 0 but skip 4 pixels (offset 12) * the first pixel is top right (looking at the simstrip, the last pixel on this grid is not used) * the order of the ESP12 module of the pixels are (in RGB): 5, 4, 0; 2, 15, 13; 12, 14, 16: clockwise looking at the top, starting near the serial pins * this translates on the PCB to (from left, screw terminal side to right): *# VCC (6.2V) *# 13 (B2) *# 12 (R3) *# 14 (G3) *# 16 (B3) *# 5 (R1) *# 4 (G1) *# 0 (B1) *# 2 (R2) *# 15 (G2) *# GND === todo === * some scripts for, say, spacestate * creating a descent tapered pole [[Media:pole-taper.zip|OpenSCAD and .stl]] ** the PVC tube parts (125mm and 100mm diameter) are in the stack space (in the cabinet's corner); they should be approximately 140cm and 75cm respectively. [[Category:ESP8266]][[Category:LEDs]]
Summary:
This is a minor edit Watch this page
Cancel
