Field Report Kit

Project: Field Report Kit
Featured:
State	Active
Members	PsychiC, xopr
GitHub	No GitHub project defined. Add your project here.
Description	Field Report Kit
Picture
No project picture! Fill in form Picture or Upload a jpeg here

synopsis

If we want field reporting on the CCC camp, we quickly need a kit that provides us that service.

Our first option was to use the available wifi, but since the link quality is unsure, we asked CoolePascal for a possible solution. He opted for the PMR 446MHz with boosted power and bandwidth. Since we only have a couple of weeks left, and our video transceiver kits were unusable, we're taking the shortcut by connecting a reporter kit directly to a DECT handset.

implementation

transmitter

• use a DECT handset
• solder a 3.5mm 4p jack contra (TRRS) onto it, according to the Nokia standard: 1-Left, 2-Right, 3-Mic, 4-Common. Note that iPwn has the Gnd and Mic mixed up.

kit

• create an amplifier for reporter feedback, and connect the jack to the kit using a poor-man's mixer (i.e. resistors)

The kit still needs some work (see todo), but it should work like this:

• left socket is an unbalanced 6.3mm jack/XLR combo connector to connect a dynamic microphone to it
• right socket is the 6.3mm headphone connector
• (todo) potentiometer defines the feedback volume
• switch powers the kit on/off (displayed by the led)
• (todo) 3.5mm TRRS plug connects to the transceiver (DECT/GSM handset)

todo

• create a working connector, preferably 4p 3.5mm jack contra to a DECT handset

Note that impedance and amplification and the like might not be optimal for connecting a dynamic microphone and headphones to the handset

• connect the TRRS plug to the kit using resistors (TBD)
• connect the potentiometer before the amplifier (check if it has impact on the transceiver signal)
• acquire 9v batteries