Fritz!Box
synopsis
Some information on tested Fritz!Boxes.
For a list of devices with their specs, check the wikipedia page
Model | Pulse support |
---|---|
Fon WLAN 7270 | yes |
Fon WLAN 7340 | no(?)* |
Fon WLAN 7360 | untested(?)* |
*) Responds to dialing 999 by calling all extensions connected.
internal numbers
recover SIP settings
Copied from blog.lix.cc:
- enable telnet by calling #96*7* (you can use "Click to dial" in the webinterface)
- telnet to your box's IP (alternatively, you could use fritz.box or 169.254.1.1)
- export the VoIP part of the config
allcfgconv -C voip -o /var/tmp/temp -c
- display the contents (filter by "password")
cat /var/tmp/temp |grep passwd
- disable telnet (#96*8*)
annex A/B/...
I think typically Dutch consumer DSL is annex A (POTS). See the wikipedia page on G.992.3.
- A: POTS: upstream starts at 25kHz
- B: ISDN: upstream starts at 138kHz
other notes
- set DTMF transmission to "RTP or in-band" if FreeSWITCH doesn't respond to the input, and displays the following message on the console:
IGNORE INFO DTMF(4) (This channel was not configured to use INFO DTMF!)