Telephone system:FreeSWITCH tricks

This page provides a couple of tricks to ease working and debugging with FreeSWITCH

config snippets

dial by incoming domain

Typically, FreeSWITCH only looks at the destination number, so 1200@ackspace.nl is treated the same as 1200@illegaleshow.nl.

This snippet routes all calls destined to either the illegaleshow.nl domain or the illegaleshow extension to 1200 in its own dialplan.

Note that there aren't many sip_to_host examples on the net (or the alternative sip_req_host for that matter)

  <extension name="Illegale show">
    <condition regex="any">
      <!-- sip_req_host -->
      <regex field="${sip_to_host}" expression="illegaleshow.nl"/>
      <regex field="destination_number" expression="^illegaleshow$"/>

      <action application="set" data="domain_name=illegaleshow.nl"/>
      <action application="transfer" data="1200 XML illegaleshow"/>
    </condition>
  </extension>

dial-string for Skinny and SIP

TODO: SCCP..

command line examples

You can run command line commands either as fs_cli -x "COMMAND" or by running the command line interface fs_cli and typing the COMMAND there

user_exists and user_data

Note that directory users have an id and optionally, a number-alias. Both can be used to register and check if it exists in the directory.

Typical for desk phones:

user_exists id 100 ackspace.nl

true

Typical for soft-phones (SIP client):

user_exists id ackspace ackspace.nl

true

Number from name or number

user_data 100@ackspace.nl attr number-alias and user_data ackspace@ackspace.nl attr number-alias

100

Name from name or number

user_data 100@ackspace.nl attr id and user_data ackspace@ackspace.nl attr id

ackspace

dial-string and sofia_contact

There is a user/ endpoint that uses the user's (or more regularly, the directory domain's) dial-string value to lookup the dial string address of the dialed user. This string usually contains the sofia_contact command:

sofia_contact ackspace@ackspace.nl

sofia/external/sip:ackspace@123.456.789.0:9876;transport=udp;user=phone;fs_nat=yes

Note: the contact URI only works on the registered user (use a number instead of a name if the user registered numerically; it happens, see Fritz!Box)