Fritz!Box

From Hackerspace ACKspace
Revision as of 22:03, 19 October 2015 by Xopr (talk | contribs) (created first Fritz!Box page with some info less common on the internet)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

synopsis

Some information on tested Fritz!Boxes.

For a list of devices with their specs, check the wikipedia page

Model Pulse support
Fon WLAN 7270 yes
Fon WLAN 7340 no(?)*
Fon WLAN 7360 untested(?)*

*) Responds to dialing 999 by calling all extensions connected.

internal numbers

See wehavemorefun.de (German)

recover SIP settings

Copied from blog.lix.cc:

  • enable telnet by calling #96*7* (you can use "Click to dial" in the webinterface)
  • telnet to your box's IP (alternatively, you could use fritz.box or 169.254.1.1)
  • export the VoIP part of the config
    allcfgconv -C voip -o /var/tmp/temp -c
  • display the contents (filter by "password")
    cat /var/tmp/temp |grep passwd
  • disable telnet (#96*8*)

annex A/B/...

I think typically Dutch consumer DSL is annex A (POTS). See the wikipedia page on G.992.3.

  • A: POTS: upstream starts at 25kHz
  • B: ISDN: upstream starts at 138kHz

other notes

  • set DTMF transmission to "RTP or in-band" if FreeSWITCH doesn't respond to the input, and displays the following message on the console:
    IGNORE INFO DTMF(4) (This channel was not configured to use INFO DTMF!)