Difference between revisions of "Siemens Gigaset"
m (updated settings to trigger SRV compatibility) |
(added PoE (test) template that shows compatibility tests) |
||
| Line 15: | Line 15: | ||
* Info Center support (TBD) | * Info Center support (TBD) | ||
| − | + | {{PoE | |
| + | |Barrel_plug=unknown | ||
| + | |Barrel_voltage=6.5V | ||
| + | |802:3af_straight=yes | ||
| + | |802:3af_crosslink=yes | ||
| + | |Legacy_straight=no | ||
| + | |Legacy_crosslink=no | ||
| + | |Compatible_straight=yes | ||
| + | |Compatible_crosslink=yes | ||
| + | |Unifi_straight=no | ||
| + | |Unifi_crosslink=no | ||
| + | |Note= | ||
| + | }} | ||
The device [https://teamwork.gigaset.com/gigawiki/display/GPPPO/FAQ+Distinctive+Ringing+protocol supports two distinctive rings]; default (extenal) and alert-internal: | The device [https://teamwork.gigaset.com/gigawiki/display/GPPPO/FAQ+Distinctive+Ringing+protocol supports two distinctive rings]; default (extenal) and alert-internal: | ||
Revision as of 21:10, 13 January 2022
general info
- The Targa DIP phone 450 (Sold years ago at Lidl) uses the same firmware as the SIEMENS Gigaset C450 IP but has different hardware (See voip-info.org and github issue)
- T-Home Sinus 501V also was a rebrand of Gigaset
- Interesting links:
N510 IP PRO
- manual
- Runs on 6.5V (1.2-1.3W)
- supports 6 GAP handsets
- 6 handsets
- up to 4 simultaneous calls
- Supports IEEE802.3af (PoE)
- Info Center support (TBD)
Power (over Ethernet) compatibility:
barrel plug: unknown 6.5V
| straight | crosslink | |
|---|---|---|
| 802.3af | yes | yes |
| legacy | no | no |
| compatible | yes | yes |
| Unifi | no | no |
Note:
The device supports two distinctive rings; default (extenal) and alert-internal:
Alert-Info: <http://www.notused.com>;info=alert-internal
Exposed internals:
PCB front (where the button goes on top of the led on the center bottom) Blurry image, sorry
PCB back
Note the clips to open the case
Note the pins to open the case
connecting the N510 IP PRO
Under Settings » Telephony » Connection, the following settings are needed:
- Connection name or number: <anything>
- Provider: Other provider
- Authentication name: <username>
- Authentication password: <password>
- Username: <username>
- Display name: <anything>
- Lookup Enabled (if available, version ≥ 240): yes
- Domain: ackspace.nl
- Registration server: <leave empty>
- Proxy server address: <leave empty>
- Proxy server port: <leave empty to trigger SRV lookup>
- Registration server: <leave empty>
- Registration server port: <leave empty to trigger SRV lookup>
- Registration refresh time: 110
- STUN enabled: Yes
- STUN server address: stun.ekiga.net
- STUN server port: 3478
- STUN refresh time: 240
- Outbound proxy mode: Automatic
- Outbound proxy port: <leave empty to trigger SRV lookup>
- Select network protocol: Automatic
- Note that these settings take a while for the Gigaset to connecto to the right server.
- Also, make sure that under Settings » Telephony » Advanced VoIP settings, SIP port: (or its random range) does not conflict with other SIP devices behind the same NAT.
