Difference between revisions of "Thomson ST2030"

Revision as of 11:19, 26 September 2016

Thomson ST2030

Get the IP address by pressing {k|menu}, {k|config} and select (scroll to) "Information"

go to http://<IP>/main.html or http://<IP>/admin.html
factory default credentials are "administrator", "784518"
go to "SETUP", under section "VoIP SERVICE", click "Basic Setup" (if the link isn't here, you've logged on with the wrong URL)
you can now edit the profiles

Note: you can disable auto provisioning under "SETUP", section "Auto Provisioning", "Basic Setup"

Under SETUP » VoIP Service » Basic Setup, the following settings are needed:

Profile Name: <anything>
SIP Unregister: unchecked
URI Type: SIP
SIP Transport: UDP
Connect Reuse: checked
Service Domain: ackspace.nl
Registrar Server Address: sip.ackspace.nl
Port: 5060
Proxy Server Address: sip.ackspace.nl
Port: 5060
SIP Local Port: <make sure this port does not conflict with other SIP devices behind the same NAT>
TLS Local Port: <make sure this port does not conflict with other SIP devices behind the same NAT>
Registration Timer: 110
Registration Frequency: 110

@@ Line 13: / Line 13: @@
 <onlyinclude>{{#ifeq:{{{transcludesection|connecting_ST2030}}}|connecting_ST2030|
 === connecting the [[Thomson ST2030]] ===
-Under '''SETUP''' &raquo; '''ViOP Service''' &raquo; '''Basic Setup''', the following settings are needed:
+Under '''SETUP''' &raquo; '''VoIP Service''' &raquo; '''Basic Setup''', the following settings are needed:
 * '''Profile Name:''' &lt;anything&gt;
 * '''SIP Unregister:''' ''unchecked''