Template:PoE

Power over ethernet compatibility property template It will display a compatibility table on the device's page that includes this template, and will create a property that can be used for search or listing in a table.

Using this template

To insert this template, use the following code:

{{PoE
|Barrel_plug=5.5/2.5
|Barrel_voltage=12V
|802:3af_straight=yes
|802:3af_crosslink=yes
|Legacy_straight=no
|Legacy_crosslink=no
|Compatible_straight=unknown
|Compatible_crosslink=unknown
|Unifi_straight=unknown
|Unifi_crosslink=unknown
|Note=Remarks here
}}
 

Here you can define the following properties:

• Barrel_plug: the outer/inner diameter in mm of the barrel jack, if present, or none/unknown
• Barrel_voltage: the voltage input of the jack (not all devices accept 48V. Leave out if no barrel jack present)
• 802:3af_straight: yes/no/unknown - whether the device powers on 802.3af using a regular (straight) cable (note the property uses a colon instead of a dot!)
• 802:3af_crosslink: yes/no/unknown - whether the device powers on 802.3af using a crosslink cable (note the property uses a colon instead of a dot!)
• Legacy_straight: yes/no/unknown - whether the device powers on via Cisco pre-standard supply using a regular (straight) cable
• Legacy_crosslink: yes/no/unknown - whether the device powers on via Cisco pre-standard supply using a crosslink cable
• Compatible_straight: yes/no/unknown - most likely yes if either 802:3af or Legacy are working
• Compatible_crosslink: yes/no/unknown - most likely yes if either 802:3af or Legacy are working
• Unifi_straight: yes/no/unknown - /!\ warning: might damage hardware /!\ whether Ubiquiti Unifi passive 24V using regular cable powers it
• Unifi_crosslink: yes/no/unknown - /!\ warning: might damage hardware /!\ whether Ubiquiti Unifi passive 24V using crosslink cable powers it

Note that all values are optional and will default to "unknown"

The template will give the following result:

Power (over Ethernet) compatibility:
barrel plug: 5.5/2.5 12V

	straight	crosslink
802.3af	yes	yes
legacy	no	no
compatible	unknown	unknown
Unifi	unknown	unknown

Note: Remarks here ‎