Difference between revisions of "Telephone system:Analog Telephone Adapter"
(added SIP settings) |
(added call progress tones) |
||
Line 75: | Line 75: | ||
(<:1000>S0) | (<:1000>S0) | ||
+ | == regional settings == | ||
+ | since ACKspace is located in the Netherlands, tones have to be adjusted, but since Dutch are cheap, there is only one frequency to work with: 425Hz. | ||
+ | |||
+ | === call progress tones === | ||
+ | * Dial tone: continuous; <code>425@-10;10(*/0/1)</code> | ||
+ | * Busy tone: 0.5s on, 0.5s off; <code>425@-10;10(0.5/0.5/1)</code> | ||
+ | * Reorder tone: same as busy | ||
+ | * Congestion (couldn't find it): 0.25s on, 0.25s off; <code>425@-10;10(0.25/0.25/1)</code> | ||
+ | * Off hook warning: same as congestion | ||
+ | * Ring back tone: 1s on, 4s off; <code>425@-10;10(1/4/1)</code> | ||
+ | * SIT(1-4) tone: 0.33s each, 950Hz, 1400Hz, 1800Hz; <code>950@-10,1400@-10,1800@-10;10(0.33/0/1,0.33/0/2,0.33/1/3)</code> | ||
+ | * Cfwd Dial Tone: 0.5s on, 0.05s off; <code>425@-10;10(0.5/0.05/1)</code> | ||
+ | * Holding tone: 0.5s on, 9.5s off; <code>425@-20;10(0.5/9.5/1)</code> | ||
== command reference == | == command reference == |
Revision as of 21:39, 8 June 2017
Contents
information
There are several ATA's laying in ACKspace
Sipura / Linksys
current dialplan
(0x.|10xx|112|116xxx|12xx|13xx|14x.|15x.|16xx|17x.|18x.|19xx|2222|2x.|[3-8]x.|9<:@gw1>S0)
A general Sipura dial plan looks like (assume the numbers are subscripts)
(<a1:b1>c1<:@gwX1>|<a2:b2>c2<:@gwX2>|...)
char | description |
---|---|
<a:b> | optional substitution; replace a with b (to remove, remove b, to prefix, remove a) |
<0:0031> | replace 0 with 0031 |
<:003145> | prefix 003145 to the number |
<9:> | remove initial 9 |
<9,:> | remove initial 9 and present different dial tone |
c | These characters can be: |
* | means the star (asterisk) key |
# | means the pound (hash) key |
x | means a single digit (0 through 9) |
[x-y] | means any digits x through y. |
[xy] | means the digits x and y (can put any number of digits here) |
. | means repeat the previously listed digit type zero or more times. For example x. means "zero or more digits," xx. means "one or more digits." |
<:@gwX> | Optional, (SPA-3000 only): dial out using the defined gateway |
<:@gw0> | dial out using the PSTN port |
<:@gw1> | dial out using gateway 1 |
S0 | is usually used at the end of a dial plan string that says "immediately dial when matched." Used for things like emergency numbers. |
! | is used at the end of the dial plan and it means "immediately reject the number dialed." Used to block, say, paid service numbers. |
Examples
immediately dial extension 1000 when the phone is offhook
(<:1000>S0)
regional settings
since ACKspace is located in the Netherlands, tones have to be adjusted, but since Dutch are cheap, there is only one frequency to work with: 425Hz.
call progress tones
- Dial tone: continuous;
425@-10;10(*/0/1)
- Busy tone: 0.5s on, 0.5s off;
425@-10;10(0.5/0.5/1)
- Reorder tone: same as busy
- Congestion (couldn't find it): 0.25s on, 0.25s off;
425@-10;10(0.25/0.25/1)
- Off hook warning: same as congestion
- Ring back tone: 1s on, 4s off;
425@-10;10(1/4/1)
- SIT(1-4) tone: 0.33s each, 950Hz, 1400Hz, 1800Hz;
950@-10,1400@-10,1800@-10;10(0.33/0/1,0.33/0/2,0.33/1/3)
- Cfwd Dial Tone: 0.5s on, 0.05s off;
425@-10;10(0.5/0.05/1)
- Holding tone: 0.5s on, 9.5s off;
425@-20;10(0.5/9.5/1)
command reference
code | function |
---|---|
**** | configuration menu |
110# | say IP address |
732668# | reboot |
... |
Linksys PAP2T
2x FxS
connecting the Linksys PAP2T
The following settiings are needed:
- TBD
Sipura SPA3000
1x FxS, 1x FxO
connecting the Sipura SPA3000
Under Admin Login » Advanced » Line 1, the following settings are needed:
- SIP Port: <make sure this port does not conflict with other SIP devices behind the same NAT>
- Proxy: ackspace.nl
- Register Expires: 110
- Use DNS SRV: yes1
- DNS SRV Auto Prefix: yes1
- Display Name: <anything>
- User ID: <username>
- Password: <password>
- Dial Plan: (1[01579]xS0|1[23]xxS0|5000S0|2xxS0|00x.|0[1234567]xxxxxxxxS0|088xxxxxxxS0|0800xxxx.|090[069]xxxx.)
1) or use: Use Outbound Proxy: yes and Outbound Proxy: sip.ackspace.nl
Fritz!box 7170
- adsl internet routing or network routing on ethernet port 1
- 1x FxO
- 3x FxS with pulse dialing support
- 1x S0 (S/T) bus
factory reset:
#991*15901590*
Also see: Fritz!Box