Difference between revisions of "Telephone system:Analog Telephone Adapter"
m (updated dialplan (more conformant)) |
(updated command reference) |
||
| Line 92: | Line 92: | ||
! scope="col" | code | ! scope="col" | code | ||
! scope="col" | function | ! scope="col" | function | ||
| + | ! scope="col" | note | ||
|- | |- | ||
| **** | | **** | ||
| configuration menu | | configuration menu | ||
| + | | | ||
| + | |- | ||
| + | | 100 | ||
| + | | check DHCP | ||
| + | | | ||
| + | |- | ||
| + | | 101 | ||
| + | | enable/disable DHCP | ||
| + | | 1 to enable, 0 do disable; requires password if set | ||
|- | |- | ||
| 110# | | 110# | ||
| say IP address | | say IP address | ||
| + | | | ||
| + | |- | ||
| + | | 111 | ||
| + | | set static IP address | ||
| + | | use '*' for the points; requires password if set | ||
| + | |- | ||
| + | | 120 | ||
| + | | check network mask | ||
| + | | | ||
| + | |- | ||
| + | | 121 | ||
| + | | set network mask | ||
| + | | use '*' for the points; requires password if set | ||
| + | |- | ||
| + | | 130 | ||
| + | | check gateway IP | ||
| + | | | ||
| + | |- | ||
| + | | 131 | ||
| + | | set static gateway IP | ||
| + | | use '*' for the points; requires password if set | ||
| + | |- | ||
| + | | 140 | ||
| + | | check MAC address | ||
| + | | | ||
| + | |- | ||
| + | | 150 | ||
| + | | check firmware version | ||
| + | | | ||
| + | |- | ||
| + | | 160 | ||
| + | | check primary DNS IP | ||
| + | | | ||
|- | |- | ||
| − | | 732668 | + | | 161 |
| + | | set primary DNS IP | ||
| + | | use '*' for the points; requires password if set | ||
| + | |- | ||
| + | | 170 | ||
| + | | check webserver port | ||
| + | | | ||
| + | |- | ||
| + | | 7932 (sweb) | ||
| + | | enable/disable web server | ||
| + | | 1 = enable, 0 = disable; requires password if set | ||
| + | |- | ||
| + | | 732668 (reboot) | ||
| reboot | | reboot | ||
| + | | Hang up after "Option successful" | ||
| + | |- | ||
| + | | 877778 (usrrst) | ||
| + | | user factory reset (all user settings) | ||
| + | | | ||
|- | |- | ||
| − | | | + | | 73738 (reset) |
| − | | | + | | factory reset |
| + | | | ||
|} | |} | ||
Revision as of 13:08, 3 January 2018
Contents
information
There are several ATA's laying in ACKspace
Sipura / Linksys
current dialplan
This dialplan is not complete but serves most numbers. To have a (pulse) phone dial 206 automatically after the first timeout, add |<:206> near the end. Note that the odd ones are 5000 and 2xx, and that some numbers are not yet added.
(1[01579]xS0|1[23]xxS0|5000S0|2xxS0|00x.|0[1234567]xxxxxxxxS0|088xxxxxxxS0|0800xxxx.|090[069]xxxx.|9xx.)
A general Sipura dial plan looks like (assume the numbers are subscripts)
(<a1:b1>c1<:@gwX1>|<a2:b2>c2<:@gwX2>|...)
| char | description |
|---|---|
| <a:b> | optional substitution; replace a with b (to remove, remove b, to prefix, remove a) |
| <0:0031> | replace 0 with 0031 |
| <:003145> | prefix 003145 to the number |
| <9:> | remove initial 9 |
| <9,:> | remove initial 9 and present different dial tone |
| c | These characters can be: |
| * | means the star (asterisk) key |
| # | means the pound (hash) key |
| x | means a single digit (0 through 9) |
| [x-y] | means any digits x through y. |
| [xy] | means the digits x and y (can put any number of digits here) |
| . | means repeat the previously listed digit type zero or more times. For example x. means "zero or more digits," xx. means "one or more digits." |
| <:@gwX> | Optional, (SPA-3000 only): dial out using the defined gateway |
| <:@gw0> | dial out using the PSTN port |
| <:@gw1> | dial out using gateway 1 |
| S0 | is usually used at the end of a dial plan string that says "immediately dial when matched." Used for things like emergency numbers. |
| ! | is used at the end of the dial plan and it means "immediately reject the number dialed." Used to block, say, paid service numbers. |
Examples
immediately dial extension 1000 when the phone is offhook
(<:1000>S0)
regional settings
since ACKspace is located in the Netherlands, tones have to be adjusted, but since Dutch are cheap, there is only one frequency to work with: 425Hz.
call progress tones
- Dial tone: continuous;
425@-10;10(*/0/1) - Busy tone: 0.5s on, 0.5s off;
425@-10;10(0.5/0.5/1) - Reorder tone: same as busy
- Congestion (couldn't find it): 0.25s on, 0.25s off;
425@-10;10(0.25/0.25/1) - Off hook warning: same as congestion
- Ring back tone: 1s on, 4s off;
425@-10;10(1/4/1) - SIT(1-4) tone: 0.33s each, 950Hz, 1400Hz, 1800Hz;
950@-10,1400@-10,1800@-10;10(0.33/0/1,0.33/0/2,0.33/1/3) - Cfwd Dial Tone: 0.5s on, 0.05s off;
425@-10;10(0.5/0.05/1) - Holding tone: 0.5s on, 9.5s off;
425@-20;10(0.5/9.5/1)
command reference
| code | function | note |
|---|---|---|
| **** | configuration menu | |
| 100 | check DHCP | |
| 101 | enable/disable DHCP | 1 to enable, 0 do disable; requires password if set |
| 110# | say IP address | |
| 111 | set static IP address | use '*' for the points; requires password if set |
| 120 | check network mask | |
| 121 | set network mask | use '*' for the points; requires password if set |
| 130 | check gateway IP | |
| 131 | set static gateway IP | use '*' for the points; requires password if set |
| 140 | check MAC address | |
| 150 | check firmware version | |
| 160 | check primary DNS IP | |
| 161 | set primary DNS IP | use '*' for the points; requires password if set |
| 170 | check webserver port | |
| 7932 (sweb) | enable/disable web server | 1 = enable, 0 = disable; requires password if set |
| 732668 (reboot) | reboot | Hang up after "Option successful" |
| 877778 (usrrst) | user factory reset (all user settings) | |
| 73738 (reset) | factory reset |
Linksys PAP2T
2x FxS
connecting the Linksys PAP2T
The following settiings are needed:
- TBD
Sipura SPA3000
1x FxS, 1x FxO
connecting the Sipura SPA3000
Under Admin Login » Advanced » Line 1, the following settings are needed:
- SIP Port: <make sure this port does not conflict with other SIP devices behind the same NAT>
- Proxy: ackspace.nl
- Register Expires: 110
- Use DNS SRV: yes1
- DNS SRV Auto Prefix: yes1
- Display Name: <anything>
- User ID: <username>
- Password: <password>
- Dial Plan: (1[01579]xS0|1[23]xxS0|5000S0|2xxS0|00x.|0[1234567]xxxxxxxxS0|088xxxxxxxS0|0800xxxx.|090[069]xxxx.)
1) or use: Use Outbound Proxy: yes and Outbound Proxy: sip.ackspace.nl
Fritz!box 7170
- adsl internet routing or network routing on ethernet port 1
- 1x FxO
- 3x FxS with pulse dialing support
- 1x S0 (S/T) bus
factory reset:
#991*15901590*
Also see: Fritz!Box
