information

There are several ATA's laying in ACKspace

Sipura / Linksys

(0x.|10xx|112|116xxx|12xx|13xx|14x.|15x.|16xx|17x.|18x.|19xx|2222|2x.|[3-8]x.|9<:@gw1>S0)

A general Sipura dial plan looks like (assume the numbers are subscripts)

(<a1:b1>c1<:@gwX1>|<a2:b2>c2<:@gwX2>|...)

char	description
<a:b>	optional substitution; replace a with b (to remove, remove b, to prefix, remove a)
<0:0031>	replace 0 with 0031
<:003145>	prefix 003145 to the number
<9:>	remove initial 9
<9,:>	remove initial 9 and present different dial tone
c	These characters can be:
*	means the star (asterisk) key
#	means the pound (hash) key
x	means a single digit (0 through 9)
[x-y]	means any digits x through y.
[xy]	means the digits x and y (can put any number of digits here)
.	means repeat the previously listed digit type zero or more times. For example x. means "zero or more digits," xx. means "one or more digits."
<:@gwX>	Optional, (SPA-3000 only): dial out using the defined gateway
<:@gw0>	dial out using the PSTN port
<:@gw1>	dial out using gateway 1
S0	is usually used at the end of a dial plan string that says "immediately dial when matched." Used for things like emergency numbers.
!	is used at the end of the dial plan and it means "immediately reject the number dialed." Used to block, say, paid service numbers.

immediately dial extension 1000 when the phone is offhook

(<:1000>S0)

2x FxS

The following settiings are needed:

1x FxS, 1x FxO

Under Admin Login » Advanced » Line 1, the following settings are needed:

SIP Port: <make sure this port does not conflict with other SIP devices behind the same NAT>
Proxy: ackspace.nl
Register Expires: 110
Use DNS SRV: yes¹
DNS SRV Auto Prefix: yes¹
Display Name: <anything>
User ID: <username>
Password: <password>
Dial Plan: (1[01579]xS0|1[23]xxS0|5000S0|2xxS0|00x.|0[1234567]xxxxxxxxS0|088xxxxxxxS0|0800xxxx.|090[069]xxxx.)

¹⁾ or use: Use Outbound Proxy: yes and Outbound Proxy: sip.ackspace.nl

factory reset:

#991*15901590*

Also see: Fritz!Box